← Back to AmplificationAmplification · Australia and New Zealand
DSA125X4
Compact four-channel installation amplifier
A compact DSA installation amplifier with direct web-based control and Low-Z / High-Z flexibility.
Discuss DSA125X4 ↗
DSA125X4Pattern controlAmplification + processing
Maximum SPL / statusCurrent catalogue
Local supportAustralia + New Zealand
Technical detail
Specifications.
Current manufacturer information, presented in the same concise format used throughout the Sound Is Everything catalogue.
- Output channels
- 4 low-impedance or 2 high-impedance
- Output, all channels driven
- 125 W per low-impedance channel / 250 W per high-impedance channel
- Supported loads
- 4 Ω / 8 Ω and 70 V / 100 V; see specification sheet for operating configuration
- Output at 16 Ω
- 125 W per channel, all channels driven
- Output circuitry
- UMAC Class D
- DSP / control
- Matrix DSP via TCP/IP; built-in Wi-Fi access point
- Power consumption
- 150 W (manufacturer specification)
- Frequency response
- 20 Hz–20 kHz, +0/−0.25 dB at 8 Ω, 3 dB below rated power
- THD+N
- <0.05%, 20 Hz–20 kHz at 8 Ω, 3 dB below rated power
- Signal-to-noise ratio
- >106 dB, A-weighted, 20 Hz–20 kHz at 8 Ω
- Protection
- Short-circuit, DC, undervoltage, temperature and overload
- Mains supply
- 100–240 V AC, 50–60 Hz
- Operating temperature
- 0–40°C
- Dimensions H × W × D
- 44.5 × 220 × 296 mm
- Weight
- 2.8 kg
- Power rating conditions
- 1% THD at 120 V AC and 230 V AC; refer to the specification sheet for power-sharing limits
- Specification source
- Danley DSA125X4 specification sheet
Documents + data
Product resources.
Official documents and data for system design. We can supply local support for selection, integration and deployment.