← Back to AmplificationAmplification · Australia and New Zealand
DNA 20K8 PRO
Eight-channel flagship professional DSP amplifier
The DNA 20K8 PRO brings 20,000 W RMS across eight channels with 96 kHz DSP, Danley presets and professional input options. Available across Australia and New Zealand with the DNA range.
Discuss DNA 20K8 PRO ↗
Pattern controlAmplification + processing
Maximum SPL / status20,000 W RMS · 8 channels
Local supportAustralia + New Zealand
Technical detail
Specifications.
Current manufacturer information, presented in the same concise format used throughout the Sound Is Everything catalogue.
- Output channels
- 8
- Total rated output
- 20,000 W RMS
- Amplifier class
- Class D
- Power rating conditions
- RMS per channel, all channels driven with programme material at 40°C; load-specific crest factors shown below
- Gain
- 32 dB with DSP levels at 0 dB
- Frequency response
- Below 7 Hz to above 30 kHz, −2.5 dB points, 4 Ω load
- THD
- <0.05% typical at 1 kHz, AES17 filter, 4 Ω load
- Dynamic range
- Typically >113 dBA from analogue inputs; >114 dBA from AES/Dante
- Crosstalk
- Better than −85 dBr at 1 kHz and −75 dBr at 10 kHz
- Maximum analogue input
- +20 dBu
- Input sensitivity
- Adjustable from 0 to +20 dBu
- Audio input formats
- Analogue and AES3; Dante is a factory-fitted option
- AES3 sample rates
- 24–192 kHz, automatic locking
- DSP resolution / sample rate
- 40-bit processing / 96 kHz
- Input processing
- Routing, delay, gain, high-pass filter, polarity, mute and EQ
- Output processing
- Routing, delay, gain, polarity, mute, crossover filters, EQ and VX limiters
- Preset storage
- 10 device snapshots and 50 loudspeaker presets
- Control overlays
- 12 independent EQ, delay and gain overlays
- Remote control
- Ethernet control and monitoring; relay and contact-closure interface
- Power saving
- Audio wake from standby in <1 ms; command wake from ECO sleep in 30 seconds
- Mains supply
- 85–240 V AC, auto-sensing; 47–63 Hz
- Inrush current
- Maximum 6 A at 115 V or 12 A at 230 V for <10 ms
- Protection
- Current, temperature and supply monitoring; clip, DC and high-frequency protection; VX speaker limiters
- Cooling
- Two variable-speed fans, front-to-back airflow; washable filters
- Rack / dimensions
- 19-inch, 2U; 88 mm high × 357 mm deep
- Net weight
- 12.5 kg
- Output at 2 Ω / 12 dB crest factor
- 1,500 W per channel
- Output at 4 Ω / 9 dB crest factor
- 2,500 W per channel
- Output at 8 Ω / 6 dB crest factor
- 1,500 W per channel
- 100 V line / 12 dB crest factor
- 2,500 W per channel
- 70 V line / 12 dB crest factor
- 1,937 W per channel
- 25 V line / 12 dB crest factor
- 625 W per channel
- Bridged output
- Confirm load-specific bridge ratings with Sound Is Everything; the manufacturer table lists two values without a clear mapping.
- Specification source
- Danley model-specific specification sheet; electrical installation and connector configuration must suit the supplied Australian or New Zealand unit.
Documents + data
Product resources.
Official documents and data for system design. We can supply local support for selection, integration and deployment.
Explore the Amplification family.
Compare the specifications and intended uses of other models in this family. These are navigation suggestions, not interchangeable substitutes.
